Key features Brodit-UK
- ProClip
- Once you have a Brodit Proclip Mount solution, if you change your car, just purchase a new proclip to fit your new car. If you have changed your device, just purchase a new holder for your device......The Brodit Solution is complete
- Center mount
- Don't forget......The Brodit solution comes in 2 Steps. [ Step 1 ] You need the proclip mount for your car.....[ Step 2 ] Then choose the holder for your device.....simple, easy and very professional
- Model: DSL-Brodit Volkswagen Caddy Brodit ProClip Center mount 2004 - 2009 Fits UK - #653435
Price: £15.66
Review DSL-Brodit Volkswagen Caddy Brodit ProClip Center mount 2004 - 2009 Fits UK - #653435 / Brodit-UK:The ProClip is a mounting bracket for the Volkswagen Caddy's dashboard. Onto the ProClip you can install e. g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Volkswagen Caddy. Made in black ABS plastic. Comes with detailed instructions.
Key features Brodit-UK
- Active Holder Tilt Swivel
- Don't forget......The Brodit solution comes in 2 Steps. [ Step 1 ] You need the proclip mount for your car.....[ Step 2 ] Then choose the holder for your device.....simple, easy and very professional
- Once you have a Brodit Proclip Mount solution, if you change your car, just purchase a new proclip to fit your new car. If you have changed your device, just purchase a new holder for your device......The Brodit Solution is complete
- Model: DSL-Brodit Samsung SGH-i780 Brodit Active Holder Tilt Swivel Fits All Countries - #971830
Price: £56.76
Review DSL-Brodit Samsung SGH-i780 Brodit Active Holder Tilt Swivel Fits All Countries - #971830 / Brodit-UK:For fixed installation, with Molex adapter system. 2A charger. The cables are to be connected inside the dashboard, this gives a discreet, neat installation without cables hanging over the interior. You can choose to use the holder as an active holder only for charging, or to connect an adapter to the Molex connector for additional features. Then you can use the holder also for power supply of a GPS reciever or other own solutions. 12/24 Volt. The product is E-approved. Connect the power cable with a 2 A fuse. 2 A charger. Professional installation recommended. [+]The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Only for the CDMA version. Attach onto a ProClip Mounting Platform.
Key features Brodit-UK
- ProClip
- Angled mount
- Once you have a Brodit Proclip Mount solution, if you change your car, just purchase a new proclip to fit your new car. If you have changed your device, just purchase a new holder for your device......The Brodit Solution is complete
- Don't forget......The Brodit solution comes in 2 Steps. [ Step 1 ] You need the proclip mount for your car.....[ Step 2 ] Then choose the holder for your device.....simple, easy and very professional
- Model: DSL-Brodit Volvo S40 Brodit ProClip Angled mount 1996 - 2000 Fits All Countries - #652793
Price: £15.66
Review DSL-Brodit Volvo S40 Brodit ProClip Angled mount 1996 - 2000 Fits All Countries - #652793 / Brodit-UK:The ProClip is a mounting bracket for the Volvo S40's dashboard. Onto the Proclip you can install e. g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Volvo S40. Made in black ABS plastic. Comes with detailed instructions.
Key features Brodit-UK
- Center mount ONLY car with navigation
- ProClip
- Don't forget......The Brodit solution comes in 2 Steps. [ Step 1 ] You need the proclip mount for your car.....[ Step 2 ] Then choose the holder for your device.....simple, easy and very professional
- Once you have a Brodit Proclip Mount solution, if you change your car, just purchase a new proclip to fit your new car. If you have changed your device, just purchase a new holder for your device......The Brodit Solution is complete
- Model: DSL-Brodit BMW X5 Brodit ProClip Center mount ONLY car with navigation 2000 - 2006 Fits All Countries - #853656
Price: £15.66
Review DSL-Brodit BMW X5 Brodit ProClip Center mount ONLY car with navigation 2000 - 2006 Fits All Countries - #853656 / Brodit-UK:The ProClip is a mounting bracket for the BMW X5's dashboard. Onto the ProClip you can install e. g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the BMW X5. Made in black ABS plastic. Comes with detailed instructions.
Key features Brodit-UK
- Don't forget......The Brodit solution comes in 2 Steps. [ Step 1 ] You need the proclip mount for your car.....[ Step 2 ] Then choose the holder for your device.....simple, easy and very professional
- Once you have a Brodit Proclip Mount solution, if you change your car, just purchase a new proclip to fit your new car. If you have changed your device, just purchase a new holder for your device......The Brodit Solution is complete
- Monitor mount Tablet DVD
- Between seats mount
- Model: DSL-Brodit Jeep Grand Cherokee Brodit Monitor mount Tablet DVD Between seats mount 1999 - 2004 Fits All Countries - #625027
Price: £39.15
Review DSL-Brodit Jeep Grand Cherokee Brodit Monitor mount Tablet DVD Between seats mount 1999 - 2004 Fits All Countries - #625027 / Brodit-UK:Mount for monitors with a hole underneath for thumb screw attachment ("-thread). For installation of Tablet DVD and multimedia screens in Jeep Grand Cherokee. The screen mount fits screens with a hole underneath for thumb screw attachment ("-thread). The screen mount is placed between the front seats, giving the back seat passengers a perfect view. The screen mount comes with a tilt swivel so it can be adjusted in order to avoid light reflection. You can take the screen with you when leaving the Jeep Grand Cherokee. Installation is quick and easy. The interior of the Jeep Grand Cherokee will not be damaged, as no drilling holes is required.
Key features Brodit-UK
- Angled mount Placed above glove compartment
- ProClip
- Once you have a Brodit Proclip Mount solution, if you change your car, just purchase a new proclip to fit your new car. If you have changed your device, just purchase a new holder for your device......The Brodit Solution is complete
- Don't forget......The Brodit solution comes in 2 Steps. [ Step 1 ] You need the proclip mount for your car.....[ Step 2 ] Then choose the holder for your device.....simple, easy and very professional
- Model: DSL-Brodit Mazda 5 Brodit ProClip Angled mount Placed above glove compartment 2005 - 2009 Fits All Countries - #653657
Price: £15.66
Review DSL-Brodit Mazda 5 Brodit ProClip Angled mount Placed above glove compartment 2005 - 2009 Fits All Countries - #653657 / Brodit-UK:The ProClip is a mounting bracket for the Mazda 5's dashboard. Onto the Proclip you can install e. g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Mazda 5. Made in black ABS plastic. Comes with detailed instructions.
Key features Brodit-UK
- Angled mount
- Once you have a Brodit Proclip Mount solution, if you change your car, just purchase a new proclip to fit your new car. If you have changed your device, just purchase a new holder for your device......The Brodit Solution is complete
- ProClip
- Don't forget......The Brodit solution comes in 2 Steps. [ Step 1 ] You need the proclip mount for your car.....[ Step 2 ] Then choose the holder for your device.....simple, easy and very professional
- Model: DSL-Brodit Suzuki Jimny Brodit ProClip Angled mount 1999 - 2006 Fits UK - #652766
Price: £15.66
Review DSL-Brodit Suzuki Jimny Brodit ProClip Angled mount 1999 - 2006 Fits UK - #652766 / Brodit-UK:The ProClip is a mounting bracket for the Suzuki Jimny's dashboard. Onto the Proclip you can install e. g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Suzuki Jimny. Made in black ABS plastic. Comes with detailed instructions.
Key features Brodit-UK
- ProClip
- Center mount
- Once you have a Brodit Proclip Mount solution, if you change your car, just purchase a new proclip to fit your new car. If you have changed your device, just purchase a new holder for your device......The Brodit Solution is complete
- Don't forget......The Brodit solution comes in 2 Steps. [ Step 1 ] You need the proclip mount for your car.....[ Step 2 ] Then choose the holder for your device.....simple, easy and very professional
- Model: DSL-Brodit Volkswagen Tiguan Brodit ProClip Center mount 2008 - 2009 Fits Europe - #854135
Price: £15.66
Review DSL-Brodit Volkswagen Tiguan Brodit ProClip Center mount 2008 - 2009 Fits Europe - #854135 / Brodit-UK:The ProClip is a mounting bracket for the Volkswagen Tiguan's dashboard. Onto the ProClip you can install e. g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Volkswagen Tiguan. Made in black ABS plastic. Comes with detailed instructions.
Key features Brodit-UK
- Console mount
- Don't forget......The Brodit solution comes in 2 Steps. [ Step 1 ] You need the proclip mount for your car.....[ Step 2 ] Then choose the holder for your device.....simple, easy and very professional
- ProClip
- Once you have a Brodit Proclip Mount solution, if you change your car, just purchase a new proclip to fit your new car. If you have changed your device, just purchase a new holder for your device......The Brodit Solution is complete
- Model: DSL-Brodit Audi A6 Brodit ProClip Console mount 1998 - 2003 Fits All Countries - #632474
Price: £15.66
Review DSL-Brodit Audi A6 Brodit ProClip Console mount 1998 - 2003 Fits All Countries - #632474 / Brodit-UK:The ProClip is a mounting bracket for the Audi A6's dashboard. Onto the Proclip you can install e. g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Audi A6. Made in black ABS plastic. Comes with detailed instructions.
Key features Brodit-UK
- Mounting equipment
- Once you have a Brodit Proclip Mount solution, if you change your car, just purchase a new proclip to fit your new car. If you have changed your device, just purchase a new holder for your device......The Brodit Solution is complete
- Don't forget......The Brodit solution comes in 2 Steps. [ Step 1 ] You need the proclip mount for your car.....[ Step 2 ] Then choose the holder for your device.....simple, easy and very professional
- Model: DSL-Brodit Brodit Accessories Brodit Mounting equipment Fits All Countries - #213018
Price: £15.66
Review DSL-Brodit Brodit Accessories Brodit Mounting equipment Fits All Countries - #213018 / Brodit-UK:Face plate with tilt swivel for AMPS With predrilled holes for Nokia and Sony Ericsson Original HF-kits, Brodit holders and THB HF-kits. Can be angled 15° in every direction.
Key features Brodit-UK
- Don't forget......The Brodit solution comes in 2 Steps. [ Step 1 ] You need the proclip mount for your car.....[ Step 2 ] Then choose the holder for your device.....simple, easy and very professional
- Active Holder Tilt Swivel
- Once you have a Brodit Proclip Mount solution, if you change your car, just purchase a new proclip to fit your new car. If you have changed your device, just purchase a new holder for your device......The Brodit Solution is complete
- Model: DSL-Brodit HTC Neon Brodit Active Holder Tilt Swivel Fits USA - #971841
Price: £56.76
Review DSL-Brodit HTC Neon Brodit Active Holder Tilt Swivel Fits USA - #971841 / Brodit-UK:For fixed installation, with Molex adapter system. 2A charger. For open position. An active holder which is to be connected inside the dashboard, this gives a discreet, neat installation without cables hanging over the interior! You can choose to use the holder as an active holder for charging of your device only, or to connect an adapter to the Molex connector for additional features. Then you can use the holder also for power supply of a GPS receiver or other own solutions (can not be used for data communication or audio connection). 12/24 Volt. The product is E-approved. Connect the power cable with a 2 A fuse. 2 A charger. Professional installation recommended. [+]The holder is attached onto a tilt swivel so you can easily adjust your device in order to avoid light reflection. Attach onto a ProClip Mounting Platform.
Key features Brodit-UK
- Don't forget......The Brodit solution comes in 2 Steps. [ Step 1 ] You need the proclip mount for your car.....[ Step 2 ] Then choose the holder for your device.....simple, easy and very professional
- Once you have a Brodit Proclip Mount solution, if you change your car, just purchase a new proclip to fit your new car. If you have changed your device, just purchase a new holder for your device......The Brodit Solution is complete
- Monitor Mount.
- Model: DSL-Brodit Brodit Accessories Brodit Monitor Mount. Fits All Countries - #213032
Price: £28.38
Review DSL-Brodit Brodit Accessories Brodit Monitor Mount. Fits All Countries - #213032 / Brodit-UK:Mounting plate with Tilt Swivel, centered. The choice for an adjustabel screen angle. Fits monitors with a vertical slot in back. Install onto ProClip.
Key features Brodit-UK
- Center mount
- Once you have a Brodit Proclip Mount solution, if you change your car, just purchase a new proclip to fit your new car. If you have changed your device, just purchase a new holder for your device......The Brodit Solution is complete
- ProClip
- Don't forget......The Brodit solution comes in 2 Steps. [ Step 1 ] You need the proclip mount for your car.....[ Step 2 ] Then choose the holder for your device.....simple, easy and very professional
- Model: DSL-Brodit Holden Commodore VY Brodit ProClip Center mount 2002 - 2007 Fits Australia - #653388
Price: £15.66
Review DSL-Brodit Holden Commodore VY Brodit ProClip Center mount 2002 - 2007 Fits Australia - #653388 / Brodit-UK:The ProClip is a mounting bracket for the Holden Commodore VY's dashboard. Onto the ProClip you can install e. g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Holden Commodore VY. Made in black ABS plastic. Comes with detailed instructions.
Key features Brodit-UK
- Monitor Mount.
- Once you have a Brodit Proclip Mount solution, if you change your car, just purchase a new proclip to fit your new car. If you have changed your device, just purchase a new holder for your device......The Brodit Solution is complete
- Don't forget......The Brodit solution comes in 2 Steps. [ Step 1 ] You need the proclip mount for your car.....[ Step 2 ] Then choose the holder for your device.....simple, easy and very professional
- Model: DSL-Brodit Brodit Accessories Brodit Monitor Mount. Fits All Countries - #213047
Price: £14.69
Review DSL-Brodit Brodit Accessories Brodit Monitor Mount. Fits All Countries - #213047 / Brodit-UK:Angled face plate, 20°, centered. The choice for a fixed, angled screen position. Fits monitors with a vertical slot in back. Install onto ProClip.
Key features Brodit-UK
- ProClip
- Don't forget......The Brodit solution comes in 2 Steps. [ Step 1 ] You need the proclip mount for your car.....[ Step 2 ] Then choose the holder for your device.....simple, easy and very professional
- Once you have a Brodit Proclip Mount solution, if you change your car, just purchase a new proclip to fit your new car. If you have changed your device, just purchase a new holder for your device......The Brodit Solution is complete
- Angled mount
- Model: DSL-Brodit BMW X3 Brodit ProClip Angled mount 2004 - 2009 Fits All Countries - #653408
Price: £15.66
Review DSL-Brodit BMW X3 Brodit ProClip Angled mount 2004 - 2009 Fits All Countries - #653408 / Brodit-UK:The ProClip is a mounting bracket for the BMW X3's dashboard. Onto the ProClip you can install e. g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the BMW X3. Made in black ABS plastic. Comes with detailed instructions.
Key features Brodit-UK
- Don't forget......The Brodit solution comes in 2 Steps. [ Step 1 ] You need the proclip mount for your car.....[ Step 2 ] Then choose the holder for your device.....simple, easy and very professional
- Once you have a Brodit Proclip Mount solution, if you change your car, just purchase a new proclip to fit your new car. If you have changed your device, just purchase a new holder for your device......The Brodit Solution is complete
- Center mount
- ProClip
- Model: DSL-Brodit Toyota Kluger Brodit ProClip Center mount 2003 - 2007 Fits Australia - #653395
Price: £15.66
Review DSL-Brodit Toyota Kluger Brodit ProClip Center mount 2003 - 2007 Fits Australia - #653395 / Brodit-UK:The ProClip is a mounting bracket for the Toyota Kluger's dashboard. Onto the ProClip you can install e. g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Toyota Kluger. Made in black ABS plastic. Comes with detailed instructions.
Key features Brodit-UK
- Don't forget......The Brodit solution comes in 2 Steps. [ Step 1 ] You need the proclip mount for your car.....[ Step 2 ] Then choose the holder for your device.....simple, easy and very professional
- Angled mount
- Once you have a Brodit Proclip Mount solution, if you change your car, just purchase a new proclip to fit your new car. If you have changed your device, just purchase a new holder for your device......The Brodit Solution is complete
- ProClip
- Model: DSL-Brodit Mercedes Benz S-Class Brodit ProClip Angled mount 2000 - 2002 Fits All Countries - #852700
Price: £15.66
Review DSL-Brodit Mercedes Benz S-Class Brodit ProClip Angled mount 2000 - 2002 Fits All Countries - #852700 / Brodit-UK:The ProClip is a mounting bracket for the Mercedes Benz S-Class's dashboard. Onto the Proclip you can install e. g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Mercedes Benz S-Class. Made in black ABS plastic. Comes with detailed instructions.
Key features Brodit-UK
- Center mount
- Once you have a Brodit Proclip Mount solution, if you change your car, just purchase a new proclip to fit your new car. If you have changed your device, just purchase a new holder for your device......The Brodit Solution is complete
- ProClip
- Don't forget......The Brodit solution comes in 2 Steps. [ Step 1 ] You need the proclip mount for your car.....[ Step 2 ] Then choose the holder for your device.....simple, easy and very professional
- Model: DSL-Brodit Mazda 323 F Brodit ProClip Center mount 1995 - 1997 Fits UK - #652120
Price: £15.66
Review DSL-Brodit Mazda 323 F Brodit ProClip Center mount 1995 - 1997 Fits UK - #652120 / Brodit-UK:The ProClip is a mounting bracket for the Mazda 323 F's dashboard. Onto the Proclip you can install e. g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Mazda 323 F. Made in black ABS plastic. Comes with detailed instructions.
Key features Brodit-UK
- Don't forget......The Brodit solution comes in 2 Steps. [ Step 1 ] You need the proclip mount for your car.....[ Step 2 ] Then choose the holder for your device.....simple, easy and very professional
- Holder For Cable Connection
- Once you have a Brodit Proclip Mount solution, if you change your car, just purchase a new proclip to fit your new car. If you have changed your device, just purchase a new holder for your device......The Brodit Solution is complete
- Model: DSL-Brodit Nokia E50 Brodit Holder For Cable Connection Fits All Countries - #905132
Price: £24.47
Review DSL-Brodit Nokia E50 Brodit Holder For Cable Connection Fits All Countries - #905132 / Brodit-UK:For Nokia cable CA-27, CA-76 (included in handsfree kit CK7W, CK-20W). Holder with cable plug attachment. To be used with Nokia original CA-27 cable, included in CK-7W car kit unit. The cable is easy to attach to the holder, and then the cable connects to the phone automatically when you put your Nokia in the holder so you do not have to connect it manually each time. (Cable not included) Compare the connector in the picture with the connector on your cable in order to find the correct holder. The holder is attached onto a tilt swivel, so it can be adjusted in order to avoid light reflection on the screen. Attach onto a ProClip Mounting Platform.
Key features Brodit-UK
- ProClip
- Once you have a Brodit Proclip Mount solution, if you change your car, just purchase a new proclip to fit your new car. If you have changed your device, just purchase a new holder for your device......The Brodit Solution is complete
- Angled mount
- Don't forget......The Brodit solution comes in 2 Steps. [ Step 1 ] You need the proclip mount for your car.....[ Step 2 ] Then choose the holder for your device.....simple, easy and very professional
- Model: DSL-Brodit Ford Transit Brodit ProClip Angled mount 2007 - 2009 Fits Europe - #853905
Price: £15.66
Review DSL-Brodit Ford Transit Brodit ProClip Angled mount 2007 - 2009 Fits Europe - #853905 / Brodit-UK:The ProClip is a mounting bracket for the Ford Transit's dashboard. Onto the ProClip you can install e. g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Ford Transit. Made in black ABS plastic. Comes with detailed instructions.
| Browse Other Handhelds & PDAs:
Models & Brands:
Brodit-UK, Brodit-UK, Brodit-UK, Brodit-UK, Brodit-UK, Brodit-UK, Brodit-UK, Brodit-UK, Brodit-UK, Brodit-UK, Brodit-UK, Brodit-UK, Brodit-UK, Brodit-UK, Brodit-UK, Brodit-UK, Brodit-UK, Brodit-UK, Brodit-UK, Brodit-UK |
